Description
ISE Moderno FHC3010 J Shape, Filtered Hot & Cold Side Tap
neotank-specification-sheet-en-gb-4998070
Only genuine InSinkErator® filters will ensure your warranty is valid. Replacing your filter every 6 months* will assure optimum performance of your InSinkErator® hot water tank by reducing the limescale and calcium build-up inside your hot water system. The filter also improves the taste of water by significantly reducing chlorine and other impurities in your tap water.
* The filter cartridge must be replaced every 6 months at the rated capacity (454 litres), or sooner if a noticeable reduction in flow rate occurs.
–
Features
- Hot and cold water faucet – dispenses near-boiling water and cold drinking water
- Self-closing hot valve for automatic shut off
- Handle moves forward to avoid hitting backsplashes
- Spout swivels 360° for convenience
- Reverse osmosis certified and compatible per NSF/ANSI 58
- Solid brass construction
- Corrosion resistant ceramic disc valve
- Available finishes – Chrome, Stainless Steel, Velvet Black, Polished Nickel
–Specifications
- Supply Connection: ¼” (0.64 cm) Compression and/ or push fitting
- Required Sink Hole Diameter: 1 ⅜” – 1 ½” (3.49 cm – 3.81 cm) Standard Sink Hole
- Required Supply Pressure: 25-125 psi (172-862 kPA or 1.7-8.6 bar)
- Backsplash Clearance for Installation: Minimum 2″ (5.08 cm) required from sink hole centre to backsplash
- Counter Thickness: Maximum of 3″ (7.62 cm)
- Shipping Weight: 4.3 lb (1.95 kg)
